15W AS-5 USB Desktop CNC Laser Engraver DIY Marking Machine For Metal, Stone, Wood. This is the most powerful DIY Laser engraver available. It can engrave metal and stone, cut wood, foam and other materials easily. Plug and play, Easy to use. Connect the USB cable to the board, install the software and start engraving.Just a few screws away from connecting to your laptop! What kind of metals can this machine mark? This machine can mark on stainless steel, iron and colorized anodized aluminum, can not engrave/mark on gold or silver, brass, etc. Can it engrave a depth on metal?
There is no visible depth for the mark, can only leave a permanent marking. Please see demonstration videos above. Can easily cut about 3-4mm normal hardness to soft wood.Hard types of woods should be tested by yourself. Can it mark on glass? Can not mark on glass or similar surface. Can it mark on slightly curved objects? This machine can mark only on completely flat surface, since the focal length is fixed. Can you answer another question about this machine? Mobile gantry, Body Aluminum + Acrylic.
Stepper motor, stepper precision: 0.00625mm. 0.02 to 0.2 sec / pixel. Pulse 15W, average 8W, focal 18mm, adjustable by software.
Stainless steel, iron, anodized aluminum, ceramics, stone, wood, bamboo, leather, plastics, etc. Software 255 adjustable laser power, low-light positioning, positioning freedom, gray, shortest path algorithm. Nanosecond timing of serial data transmission substantially without delay, power adjustable, high power pulsed laser, lifts fast focusing, targeting low light gray print!
External adapter, DC 12V 4A, input AC 100V-240V, 47Hz-66Hz. Machine developed for use with AC master software, support Chinese, English, Russian, 4 languages. Package size: 37 34 21cm. Super-reduced instruction, 1 byte of instruction accounted for more than 40%. Faster than arduino + grbl , and instantly be able to complete the task of interpretation active instruction; shortest path algorithm can shorten the time.
You will receive the engraver in almost completely assembled condition. It takes less than 5 minutes and a screwdriver to assemble it. First, put the laser module on the top part of the frame, it has a special mount that fits the laser. Just unscrew the bolts, put the laser in it's designated place and put the bolts back.To assemble the frame you need to unscrew 4 bolts, put the top part of the frame in place, and put the bolts back. After you finished assembly of the frame and laser module, you will need to connect the boards, USB cable and power supply. To be sure your address is not a remote area you can check the DHL remote area list website.
The item "15W AS-5 USB Desktop CNC Laser Engraver DIY Marking Machine For Metal Stone Wood" is in sale since Wednesday, October 19, 2016. This item is in the category "Business & Industrial\Printing & Graphic Arts\Screen & Specialty Printing\Engraving". The seller is "jzelectric" and is located in Hong Kong. This item can be shipped worldwide.