This is a professionally built brand new flash dryer With Temperature Display. It has a 18x18 heating grid opening, wheels, and a standard 110V plug so there is no special wiring required. This unit can be raised or lowered from 30" to 48".It is very heavy duty. The temperature is over 400 degrees F at distance of 2 1/2 below the flash heating element. It can easily cure plastisol ink for silkscreen printing.
The unit is ultra heavy. It has a base diameter that is reasonable (about 38). It can easily roll thru standard 32 door way. We have a Ranar flash dryer. It is only about 2/3 the weight.
It is much lighter so its base has to have a big diameter (over 50) to prevent it from tipping over. (see photo above) This create quite a bit of inconvenience because we keep on tripping or kicking the Ranar flash unit while we are working on silk screen printing. This flash dryer base is compact and it will not tip over because it is heavy. Special Note: This item takes approximately 5 minutes from initial turn on to stabilize temperature.There will be natural fluctuations in the temperature as you use the item. Heating Area : 18" x 18". Base Dimensions : 38" x 38".
Top Dimensions : 29" x 19". Assembled Dimensions : 38" x 38" x 48.Max Temp : 200 degrees Celsius. Suggest Temp Range : 140-180 degrees Celsius. Average Current Draw : 13 Amps. Maximum Current Draw : 16.5 Amps. Average Power Usage : 140-180 degrees Celsius. Maximum Power Usage : 2000 Watts.
Average Power Usage : 1350 Watts. Max Temp : 60 degrees Celsius. 1 x 2000W Flash Dryer With Temperature Display. 8 x Screw For Base Legs. 1 x Base Leg Support Plate.
Adjustable height floor stand from 30" to 48". Double Boxed for secure and rigid packaging.1700 Watt, on/off switch and over current protection. Styrofoam padded on all sides and internally secured. Heavy Duty Steel Bearing Castors. Black Powder Coated Steel Welded Frame. Secure Handle for Moving the Dryer in production. Sturdy Base with wheels for easy use. Plugs into a standard wall outlet. Runs on standard 20 amp house circuit. We have Four warehouses located in CA, NY, NJ & GA. Please contact our customer service team immediately if. You changed your mind and wish to request a return. Please do not return or post items before obtaining instructions from us. This also applies to orders cancelled while in transit. Please make sure that item has NO man-made sabotage. Used items will not be accepted for return. We will require a picture of the damaged part for verification. We seeks to sell the greatest value products on the market. These items should be of an acceptable quality, fit for purpose, and matching their description. We have a highly experienced engineering and technical team who specialise in researching and developing all our products. We benchmark our products against high standards and that's why our customers keep coming back. The item "18x18 Flash Dryer Silkscreen Printing Heating Heavy Duty Adjustable Prints Kit" is in sale since Monday, August 31, 2020. This item is in the category "Business & Industrial\Printing & Graphic Arts\Screen & Specialty Printing\Screen Printing". The seller is "homesupplies01" and is located in Westbury, New York. This item can be shipped to United States.