220V Desktop Semi-Automatic Business Name ID Card Cutter Cutting Machine

  

Semi-Automatic Business Card Cutter (89 x 54mm), 220V. Description: This semi-automatic business card cutter is used for cutting business card. Its durable for the steel blade and the blade could be milled by itself to ensure it will be sharp.

This cutter cut business card and photo without rough edges because of its reasonable mechanical structure. This name card cutter can also cut laminated card or photo. Please make sure the cutter is power off and unplug the power plug first when you clean the machine. Test it before using if the business card cutter does not work for a long time. Make sure the name card is aligned with the blade and tighten the screw of the cutter. Don't put your hands under the blade when the machine is running. Please operate under the operation manual strictly. The voltage of this item is 220V. 8.3" × 11.7" (210 × 297mm)/ 7.6" × 11.6" (195 × 295mm). 3.5" × 2.1" (89 × 54mm).

18.7" × 11.0" × 8.6. 18.9" x 10.8" x 9.0 (480 x 275 x 230mm).

Adjustable paper feed knob 2. Adjustable paper feed knob 1.

Prepare the business card cutter and then plug the power plug. Insert the card paper along the fixed feed tension1 to the feed table in pass through No. Adjust the adjustable paper feed knob 1 beneath the housing to ensure the center line in your content must be centered to the arrow mark 1. Adjust paper margin adjustable knob on the left side to lock the card paper in the proper position, then switch on to bring out the semi finished cards and switch off when all first pass completed.

Insert the semi finished cards along the fixed feed tension 2 into the feed table in pass through No. Semi finished content must be put along the stop knob on the right side closely by adjustment of adjustable paper feed knob 2 and make sure the arrow mark 2 precisely points at the third broken line in the card paper through see-through window.

Power on again followed by pressing the push mark with two thumbs forward evenly to see semi finished cards along the fixed feed tension 2 into the feed table in pass through No. 1 from see-through window then power off when all finished. Open the lid to clear wastepaper or the content stuck in the blade after all works completed but be sure the machine is powered off.

The business card cutter is widely used for cutting name card. Photo and picture card, etc. We can give you help once if there is some problem. The item "220V Desktop Semi-Automatic Business Name ID Card Cutter Cutting Machine" is in sale since Friday, May 8, 2015.

This item is in the category "Business & Industrial\Printing & Graphic Arts\Bindery & Finishing Equipment\Paper Cutters & Trimmers". The seller is "bestchannels" and is located in Beijing.

This item can be shipped worldwide.

• Featured Refinements: Business Card Cutter
• Model: 3.5" × 2.1" Desktop
• MPN: 0062001475400
• Brand: Ving
• Voltage: 220V
• ID: 14754