60W Co2 Laser Engraver Cutter Engraving Cutting machine 20x28USB Port Ruida

  
New 60W Co2 Laser Engraver Cutter Engraving Cutting machine 20x28USB Port Ruida. The best way to describe how this lasers work is to compare it to your printer. This devise uses the images you would typically print on paper, but instead, a CO2 laser beam is fired on the surface which engraves the design on the material. Laser: CO2 laser source, 60 watts. Engraving Materials: Wood, cork, veneer, rubber, jade, acrylic, plastic, glass, fiberglass, marble, corian, leather, fabric, cloth, coated metals, aluminum oxide, ceramics, tile, mylar, delrin, melamine, paper, pressboard, matte board and more. Cutting Materials: Wood, acrylic, plastic, corian, delrin, cloth, leather, melamine, paper, pressboard, matte board, mylar, rubber, veneer, cork and more. We strive to provide the best image quality, speed, reliability, and ease of use. By using only the highest-quality components, our lasers are known for their reliability and performance. No additional, expensive lens packages needed to get the highest resolution engraving thanks to our Radiance Optics. Provides a visible laser beam to determine exactly where the laser will fire. Designed to last for a long time without wobbling, failure and replacement of the plastic bearings. Precision drive belts are made from the sturdiest, belt (x-axis) and steel cord (y-axis). Front and back drop-down doors for easy access. You can open the two doors to accommodate larger material. Easily access the back of your machine for cleaning and maintenance.

Provides the best operator safety features available. Easily map different speed and power settings to create different colors in your file. Its Ruida DSP Control System works with most graphics design programs, such as CorelDraw, AutoCAD, etc. This software allows you to create same shape patterns with different colors.

Network the Laser Across Your Business. Communicates with your laser through Ethernet or USB. Blows a constant stream of air on the cutting area. The adjustable table can easily be moved up and down to fit a wide variety of engraving materials and products.

System Environment:WINDOWS 2000/WINDOWS XP/ WIN7/ WIN8/VISTA/10 (32bit and 64 bit). DO NOT support iOS system. Engraving Area:28" x 20"(700 x 500 mm). Maximum Engraving Depth:10 mm. Laser Wattage:CO2: 60, watts. Laser Source:Digitally controlled CO2 laser tubes are fully modular, permanently aligned and field replaceable. Attach an air compressor to our included Air Assist toremove excess heat and combustible gases from the cutting surface by directing a constant stream of compressed air across the cutting surface.

Compatible Software:CADlaser, CorelDraw ects (Do not include in the package). Red Dot Pointer:Since the laser beam is invisible, a Red Dot Pointer on the Fusion Laser allows you to have a visual reference for locating where the laser will fire. X-Axis Bearings:Ground and polished stainless steel long-lasting bearing system.

Resolution:User controlled up to 4500 dpi. Speed and Power Control:Vector color mapping links speed, power and focus to any RGB color.

Size (W x D x H):47.2" x 34.2" x 36.6(1200 x 870 x 930 mm). Weight:330.7 lbs (150 kg).

Electrical Requirements:Auto-switching power supply accommodates 110volts, 60 Hz, AC. Air Compressor:An Air Compressor can work with the included Air Assist features of the laser systems. Direct a constant stream of air to your cutting surface to remove heat and combustible gases from the work area. Metals with plating can NOT be engraved or cut. CO2 lasers will mark bare metals when coated with a metal marking solution.

Our CO2 laser systems are mainly designed to engrave and cut non-metallic materials, they can also be used to mark on metal with the aid of metal-marking compound. 1x bag with allen wrenches. 1x roll of double faced tape. How tall is this product? Whats the height of the base?

What software is this engraver compatible with? What systems is this engraver compatible with? Its perfectly compatible with Windows 8, 7 10 (64/32 bit), XP, 2000, Vista, but NOT compatible with iOS system. Is there any limitation for the maximal depth of engraving materials?

What size is the engraving area? 28" x 20" /700 x 500 mm. Whats the maximal engraving depth of this engraver? It shall be within 0-10mm, but still depends on the speed and materials.

How much is the laser power? CO2 glass 60W rated an estimated 2,500 3,000 hours. 8 hours work-time a day is recommended and youd better let the engraver rest for half an hour each 4 hours.

Is there any limitation on the material thickness? The maximum engraving material thickness shall be 230mm. What engraving materials can this engraver work with?

Wood, cork, veneer, rubber, jade, acrylic, plastic, glass, fiberglass, marble, corian, leather, fabric, cloth, coated metals, anodized aluminum, ceramics, tile, mylar, delrin, melamine, paper, pressboard, matte board and more. What cutting materials can this engraver work with? Wood, acrylic, plastic, corian, delrin, cloth, leather, melamine, paper, pressboard, matte board, mylar, rubber, veneer, cork and more. Is there any rotary attachment in it? No but you can install one. How long is the laser tube? Is there a red dot pointer in the engraver?

How much is the engravers internal storage? Is there an air compressor in it? Is the laser safe to operate? Yes, the laser is completely safe to operate.

It is secured with interlock devices NOT INCLUDED so it will not run with the devise door open. Can the laser engrave metal? Can the laser cut through metal? But it will still mark on coated metal, even though our system is not ideally suited for metal applications. Didn't find the answer to your question?

We're happy to help you with anything! We do not process any orders on weekends or holidays.

Please provide us with your. Detailed address and contact number. When placing your order so that. Changes are not allowed once the product ships out! 2: LTL courier service usually takes.

3: Business addresses and residential addresses. Please look for more information in our listing. Special circumstances will be listed clearly in the listing.

If your item has been damaged in transit or. Please do check everything carefully after you received the parcel. The damage except DOA (Dead-On-Arrival) would not be covered if it's your fault. We believe that it is our vision and mission to provide innovative products with best service and competitive price to satisfy you. Our goal is to make sure that you can find exactly what you are looking for and make it easy for you to place your orders.

The item "60W Co2 Laser Engraver Cutter Engraving Cutting machine 20x28USB Port Ruida" is in sale since Monday, September 23, 2019. This item is in the category "Business & Industrial\Printing & Graphic Arts\Screen & Specialty Printing\Engraving". The seller is "motorprincess" and is located in Memphis, Tennessee.

This item can be shipped to United States.

• Brand: Preenex
• MPN: Does not apply
• Control system: DSP
• Working size: 500 mm x 700 mm with double side open
• Up and down work plate: 7.8" (200 mm)
• Laser tube type: CO2 Glass sealed laser tube
• Laser power: 60 W
• Driver type: Micro Stepping Motor
• Max speed: 1000 mm/s (different materials differ)
• Resolution: Up to 4500 dpi.
• Location precision: 0.01 mm
• PC Interface: USB 2.0 and USB Disk
• Software: RDWorks V8, PowerCut, CorelDraw or AutoCAD
• Image Form: HPGL, BMP, GIF, JPG, JPEG, DXF, DST, AI
• Machine Dimension (L / W / H): 47.2" x 34.2" x 36.6"(1200 x 870 x 930 mm)
• Package: Standard Wooden case for export
• N.: 330.7 lbs (150 kg)
• Maximum engraving depth: 3-4mm for acrylic, wood, 2-3mm for harder material
• Maximum cutting depth: 5mm for acrylic, wood, 4mm for harder materials
• Maximum engraving area: 700 * 500 mm
• Warranty: 2 years warranty