The first desktop to print the new technology of DTF. DTF is taking the T-shirt decorative industry to a new level, and our DTF Printer Epson L1800 can be used to print Transfer Film with our special branded inks and powder to be press on both Dark and Light garments like cotton, polyester, 50/50 blends, spandex, leather, and more. The Epson L1800 model is one of the most popular and affordable printers and easy to use.
The max print area is 13 inches x 19 inches paper size A3+. Dimensions are 28" long x 13" wide x 9 height. Using our branded inks and with low maintenance, your DTF printer will deliver superior and high-quality prints. DTF Printer - Digital Transfer Film Printer (dimensions: 28" long x 13"wide x 9 height). Printer ready for DTF with waste ink bottle.
Able to print up to A3+ size (13" wide x 19" long). 1 Empty Set of Dampers and Lines (already installed).
6 DTF Inks (Started Pack). 25 DTF Transfer Film A4 (8-1/4 x 11-3/4).25 DTF Transfer Film A3 (11-3/4 x 16-1/2). CONFIGURATION: (C = Cyan, M = Magenta, W = White, W = White, K = Black, Y = Yellow). This configuration will allow you to print designs for both Dark and Light Garments such as black, white, gray, blue, red, etc. With 2 channels dedicated to the white ink which is used when printing on Dark Garments, do a white base or just print in white. Just remember due to the inherent nature of white ink, requiring that you shake white ink before start printing. T-Shirt Material Can Be Used: For best results, we recommend 100% Cotton, polyester, 50/50 Blends, leather, spandex. DTF Inks: Alway use DTF inks for your DTF Printer and keep them in a safe place. You can use and re-order our branded inks. DTF Transfer Film: Instead of printing on the garment, you are going to print on transfers that can be press to any garments to sell or sell the transfers. DTF Powder: The powder is necessary to be melt into the inks (design) so your transfers can be press to any garments to sell or sell the transfers. DTF does not use pretreatment like DTG required for dark garments, instead use a powder combine with the inks to make the perfect transfers for your t-shirts.
It is recommended to print at least once per week or clean the print head once per week. DTF inks will not clog easily like DTG inks. Heat Press: A Heat Press is required for pressing the transfers and also melt the powder. We recommend a size 15 x 15 or better 16 x 20 to make sure you cover all. Heat Press Sheets: We recommend using a Teflon sheet, parchment paper, or kraft paper.
The Teflon Sheet gives the print a Gloss Finish, Parchment Paper gives the print a Semi-Gloss Finish, and Kraft Paper gives the print a Matte Finish. Room Temperature: It is an important factor operating any DTF Printer in a room with a temperature below 76 degrees. What's NOT Included but you need. Computer / Laptop with Windows 7 or higher and an available USB port. Heat Press to press transfers and melt the powder.
The item "DTF Printer L1800 A3+ Bundle with Inks Powder Digital Transfer Film & Acrorip 9" is in sale since Thursday, October 1, 2020. This item is in the category "Business & Industrial\Printing & Graphic Arts\Screen & Specialty Printing\Other Specialty Printing". The seller is "kingdomdtf" and is located in Davenport, Florida. This item can be shipped to United States.