Monport 130W 35x55 CO2 Laser Engraver Engraving Autofocus 4L Water Chiller

  

Monport 130W 35"x55" CO2 Laser Engraver Fireproof Built-in Water Chiller Ruida. Monport 130W CO2 Laser Engraver, Built-in 4L Water Chiller, 35x55In Laser Cutting Engraving Machine with Red Dot Pointer Autolift Autofocus Air Assist and LightBurn for Wood Acrylic More.

Fireproof Viewing Window -- This viewing window is made from special fire-resistant polyester with iron frames. The melting point of this polyester ranges from 432° to 488° and the ignition temperature of it is over 1000°, which can dramatically decrease the possibility of fire accidents caused by the heat of laser burning the materials. Built-in Smart Water Chiller -- The built-in 4L water chiller is easy to operate and cools down the temperature without any other machines. To meet different needs, there are two cooling modes, constant and intelligent temperature modes.

This professional water chiller has multiple warning protection mechanisms such as an alarm for ambient temperature, an alarm for overheated/overchilled water temperature, and so on. When an alarm occurs, the display will alternate between the water temperature and the error.

Enclosed Aeronautical Aluminum Rail -- Equipped with X and Y stepper motors, this rail features efficient power transmission with high precision. The enclosed rail is designed to avoid smoke and debris and prolong the service time of rail units. Laser Protective Glasses for Free -- Lasers emit radiation in the invisible form of light. This pair of laser protective glasses is certified to protect your eyes against radiation damage by looking at the class 4 laser beam in any way (directly, indirectly, or even looking at the laser dot on a surface can damage your eyes).

High Speed and Resolution -- The Engraving Speed is up to 800 mm/s; The Cutting Speed is up to 400 mm/s; The Resolution is up to 4500 dpi; 3 LED light strips above the work bed provide illumination for precision; 2.0 Focal distance provides high resolution and etching of tiny fonts. Built-in Air Assist System -- A built-in air assist system guides a pressurized air stream through the laser head nozzle to displace debris, heat, and combustible gases from the engraving surface and laser beam path, keeping engravings more precise. Ruida Digital Controller -- Whether your chosen software is LightBurn, RDworks, AutoCAD, or CorelDRAW, this Ruida digital controller can support the given platform.

The Ruida Controller with a digital display can control the laser head, start or stop projects, adjust laser power and speed settings and so on. Autofocus -- Use the control panel to correct the focus automatically at the touch of a button - no more manual testing and adjustment. Red Dot Guidance -- The red dot shows the laser head position, marks the working path and frames the project sizes, assists you with more convenience and guidance.

Bring your ideas to life with MONPORT's high-powered laser engravers and cutters! This 130W CO2 laser cutter continues to uphold our high standards with its Ruida control panel, bundled RDWorks 8 & CorelLaser software, long-lasting Yongli laser tube, digital laser power supply, large 35x55 inch working area, Built-in 4L Smart Water Chiller.

This laser cutting and engraving machine provides dual work platforms: a honeycomb bed for smaller objects and a firmer aluminum knife blade bed for larger, harder substrates like acrylic blocks. Its autofocusing system works with the bed's electronic lifting platform to get you marking, engraving, and cutting your designs onto and into wood, paper and cardboard, plastics and acrylic, leather, fabric, and other nonmetallic materials more quickly and efficiently than ever before. Compatible with most third-party graphic software, this laser etching machine lets you upload your designs using the included software or via the Ethernet or USB ports. Choose your substrate, adjust your parameters, and the laser will engrave and cut your design with pinpoint precision.

Adjust the motorized z axis workbed up or down from the control panel and the provided sensors will let you automatically adjust the laser beam to compensate. Safe as can be, this laser engraver and cutter can lock its control panel via password and the included keys; automatically cuts off the laser beam if the protective cover is opened; and provides an installed air assist to blow debris clear of the laser as it is created. The bundled industrial-grade water chiller effectively removes heat from your CO2 laser tube, keeping your machine nice and cool during use. With MONPORT's precision engineering, quality materials & assembly, and good name, you can do no better for all your marking, engraving, and cutting projects at home or in your workshop. The built-in 4L water chiller is easy to operate and cools down the temperature without any other machines. 2 Colling Modes: constant and intelligent temperature modes. The RUIDA Motherboard and intuitive RD Control System is easy to use and offers advanced capabilities. Compatible with third party software like LightBurn and AutoCAD.

The preinstalled autofocusing tool lets you quickly correct the focus of your laser directly from the control panel without any need to bother with troublesome acrylic tools and tedious manual adjustment. The transparent acrylic window's sepia filter allows you to observe your engraver in action, as the tint blocks the laser beam and protects your eyes. The honeycomb grid has high structural stability with noise & heat reducing properties for smaller items.

The aluminum knife platform is height adjustable with a strong supportive frame for larger materials like acrylic. The digital power supply displays real-time power information when the machine is running. It also has a test feature to speed troubleshooting if any problems develop.

E asy C leanup S et. Below the work platform, a debris collection system gathers the debris into a removable collection tray, keeping your machine as clean and clear. The wide 35" x 55" engraving table includes both honeycomb and aluminum knife beds to handle a wide variety of nonmetallic substrates, including wood, leather, fabric, stone, paper, and much more! The laser automatically stops engraving, cutting, or marking when the workbed's cover is opened for your safety.

Close the cover and press Start to resume your work. Indicator Lights & Emergency Stop.

Three indicator lights keep you easily aware of your machine's operation while the emergency stop immediately cuts the laser and stops all moving parts in the event of accident. The 130W laser tube can reach a peak power wattage up to 140W, allowing you to cut deeper and engrave thicker materials.

Working Dimension: 35" x 55" (90 cm x 137 cm). Machine Dimension: 72.8'' x 55.1'' x 35.4'' (185 cm x 140 cm x 90 cm). Package Dimension: 79" x 61" x 39 (200 cm x 154 cm x 100 cm). 7" Standard Z-depth and 8" Max Z-depth. Works on Windows XP, 2000, Vista, WIN 7, 8, 10 & 11, both 64 & 32 bit.

MacOS (Version 10.11 and higher) ONLY with LightBurn software. Compatible with Lightburn, RDWorks, Coreldraw, Auto-CAD. Supported image formats: BMP, HPGL, GIF, JPG, JPEG, DXF, DST, AI and others. Rated at over 130 watt. Recommended engraving speed: 100 - 500mm/s. Recommended cutting speed: 1 - 30mm/s (actual speed depends on the thickness of material).

Linear System - Enclosed aeronautical aluminum rails. Motion - Equipped with stepper X, Y, Z axis, plus mechanical limit switches. Cooling - Built-in 4L water chiller with two operating modes. Air Assist - Built-in air assist with no external compressor required.

Ventilation - On-board exhaust fan, as well as an exhaust hose so you can vent the fumes to the outdoors. Standard 110V, AC power connection.

4-pin port connection for rotary axis devices. Temperature- Recommended Operating Temperature: 60-104 °F (16C-40C). Attention: the CO2 water temperature must be maintained at 60-70°F (16-21°C). 130W CO2 laser tube with an estimated lifetime of up to 12,000 operation hours depending on power setting usage and water cooling performance.

PLEASE NOTE: Frequent use of high laser power settings will shorten the laser tube lifetime as follows. Low Power 10-40% = 11,000-12,000 Hours. Moderate Power 40-70% = 9,000-10,000 Hours.

High Power 70-100% = 6,000-7,000 Hours. Can safely engrave or cut any laser-compatible material. Wood, glass, acrylic, fabric, leather, paper, cardboard, rubber. If necessary, we can test it for you. A Pair of Laser Protective Glasses 1.

Ethernet to Ethernet Cable 1. USB Type-A to Type-A Cable 1. Venting Exhaust Duct 4 ft. USB Drive with Software 1. We will reply your message within 48 hours. If you do not receive our reply within 48 hours, pls. Post a message again because sometimes our message system may block some emails. If you are satisfied with our service, pls. Our aim is to provide Level Customer Service, your recognition will encourage us greatly and serve you better. We strive to keep all our customers satisfy. This item is in the category "Business & Industrial\Printing & Graphic Arts\Screen & Specialty Printing\Engraving".

The seller is "itnsansr" and is located in this country: US. This item can be shipped to United States.

• Brand: Monport
• Engraving Method: Laser
• Type: Engraving Machine
• Machine Operation: Computerized
• Power: 130 W
• Engraving Application: Part Marking/Serial Number Tag