Monport 150W 40x64 CO2 Laser Engraver Cutter Engraving Machine Autofocus Rudia. Monport 150W CO2 Laser Engraver, 150W Laser Cutter and Engraver Machine, 40x64 inch Laser Cutting and Engraving Machine, with Red Dot Pointer Autolift Autofocus Air Assist and LightBurn for Wood Acrylic More.This viewing window is made from special fire-resistant polyester with iron frames. The melting point of this polyester ranges from 432° to 488° and the ignition temperature of it is over 1000°, which can dramatically decrease the possibility of fire accidents caused by the heat of laser burning the materials. - Equipped with X and Y stepper motors, this rail features efficient power transmission with high precision. The enclosed rail is designed to avoid smoke and debris and prolong the service time of rail units. Laser Protective Glasses for Free? - Lasers emit radiation in the invisible form of light. This pair of laser protective glasses is certified to protect your eyes against radiation damage by looking at the class 4 laser in any way (directly, indirectly, or even looking at the laser dot on a surface can damage your eyes). Whether your chosen software is LightBurn, RDworks, AutoCAD, or CorelDRAW, this Ruida digital controller can support the given platform. The Ruida Controller with a digital display can control the laser head, start or stop projects, adjust laser power and speed settings and so on.
The Engraving Speed is up to 800 mm/s. The Cutting Speed is up to 400 mm/s. The Resolution is up to 4500 dpi.
3 LED light strips above the work bed provide illumination for precision. 2.0 Focal distance provides high resolution and etching of tiny fonts. Use the control panel to correct the focus automatically at the touch of a button - no more manual testing and adjustment.
A built-in air assist system guides a pressurized air stream through the laser head nozzle to displace debris, heat, and combustible gases from the engraving surface and laser beam path, keeping engravings more precise. 3-ways to Connect with PC End. Two USB ports provide options including flash drive connectivity and a USB-to-USB PC connection. In addition, one ethernet port is also available for connection.
The red dot shows the laser head position, marks the working path and frames the project sizes, assisting you with more convenience and guidance. The safety shutdown sensor helps stopping the machine even if the window cover is on. Once closed, press the "Enter" button to continue operation. The wide 40'×64' engraving table includes both honeycomb & aluminum knife beds to handle a wide variety of nonmetallic substrates, including wood, leather, fabric, stone, paper, & much more! The RUIDA Motherboard and intuitive RD Control System is easy to use and offers advanced capabilities.Compatible with third party software like LightBurn and AutoCAD. The preinstalled autofocusing tool lets you quickly correct the focus of your laser directly from the control panel without any need to bother with troublesome acrylic tools and tedious manual adjustment. The transparent acrylic window's sepia filter allows you to observe your engraver in action, as the tint blocks the laser beam and protects your eyes. 150W CO2 laser tube with an estimated lifetime of up to 12,000 operation hours depending on power setting usage and water cooling performance, allowing you to cut deeper and engrave thicker materials.
Machine Dimension: 84.6'' x 59'' x 35''(215cm x 150cmx 90cm). Package Dimension: 89.4" x 65.4" x 46.9 (227 x 166 x 119 cm). Working Dimension: 40" x 64" (100 cm x 160 cm). Pass-through Dimension:2.9'' x 66.7''(7.5cm x 169.5 cm).
Max Cutting Speed: 30mm/s (actual speed depends on material). Max Engraving Depth: 19.05mm.
Min Engraving Depth : 0.01 mm. 7" Standard Z-depth and 8" Max Z-depth. Net Weight: 1000 lbs (450 kg).
Package Weight: 1062.6 lbs (482 kg). Works on Windows XP, 2000, Vista, WIN 7, 8, 10 & 11, both 64 & 32 bit.MacOS (Version 10.11 and higher) ONLY with LightBurn software. Compatible with Lightburn, RDWorks, Coreldraw, Auto-CAD. Supported image formats: BMP, HPGL, GIF, JPG, JPEG, DXF, DST, AI and others. Rated at over 150 watt. Recommended engraving speed: 100 - 500mm/s. Recommended cutting speed: 1 - 30mm/s (actual speed depends on the thickness of material). Linear System - Enclosed aeronautical aluminum rails. Motion - Equipped with stepper X, Y, Z axis, plus mechanical limit switches. Cooling - Easy-to-setup water pump and hoses. Air Assist - Built-in air assist with no external compressor required. Ventilation - On-board exhaust fan, as well as an exhaust hose so you can vent the fumes to the outdoors.
Standard 110V, AC power connection. 4-pin port connection for rotary axis devices.
Temperature- Recommended Operating Temperature: 60-104 °F (16C-40C); Attention: the CO2 water temperature must be maintained at 60-70°F (16-21°C). 150W CO2 laser tube with an estimated lifetime of up to 12,000 operation hours depending on power setting usage and water cooling performance. PLEASE NOTE: Frequent use of high laser power settings will shorten the laser tube lifetime as follows. Low Power 10-40% = 11,000-12,000 Hours. Moderate Power 40-70% = 9,000-10,000 Hours.High Power 70-100% = 7,000-8,000 Hours. Can safely engrave or cut any laser-compatible material. Wood, glass, acrylic, fabric, leather, paper, cardboard, rubber. If necessary, we can test it for you. A Pair of Laser Protective Glasses 1. Ethernet to Ethernet Cable 1. USB Type-A to Type-A Cable 1. Venting Exhaust Duct 4 ft. USB Drive with Software 1.
FDA Approved & CE Certified. If you pay means you agree with the postal service.
If you have any question, feel free to send us a message and we will reply you within 24 hours. Due to the difference of time zone, sometimes the reply will be delayed with 24 hours(excluding weekend & holiday). Enjoy your visiting and shopping here.This item is in the category "Business & Industrial\Printing & Graphic Arts\Screen & Specialty Printing\Engraving". The seller is "awnnnsye" and is located in this country: US. This item can be shipped to United States.